Nome | Cor | |
6 X Magnet Cylindrical | Black |   | |
1 X Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment | Black |   | |
1 X Hinge Tile 1 x 2 1/2 with 2 Fingers on Top | Black |   | |
1 X Hinge Plate 1 x 2 with 3 Fingers | Red |   | |
1 X Brick, Modified 1 x 2 with Pin | Black |   | |
1 X Hinge Plate 1 x 2 with 2 Fingers | Red |   | |
1 X Hinge Plate 1 x 2 with 3 Fingers On Side | Red |   | |
8 X Plate 2 x 8 | Black |   | |
4 X Plate, Round 2 x 2 with Axle Hole | Black |   | |
2 X Antenna Whip 8H | Trans-Neon Green |   | |
2 X Brick, Modified 1 x 2 x 2/3 with Studs on Sides | Black |   | |
3 X Plate, Modified 1 x 2 with 1 Stud (Jumper) | Red |   | |
1 X Slope 33 3 x 2 with MTron Logo Pattern | Red |   | |
2 X Tail 4 x 1 x 3 | Red |   | |
3 X Plate 2 x 4 | Black |   | |
1 X Wedge, Plate 8 x 8 with 4 x 4 Cutout | Black |   | |
3 X Magnet Holder Tile 2 x 2 (Undetermined Type) | Black |   | |
1 X Plate, Modified 2 x 2 with Pin on Bottom | Black |   | |
1 X Plate 2 x 4 | Red |   | |
4 X Brick, Modified 1 x 2 x 2/3 with Studs on Sides | Light Gray |   | |
2 X Tail 4 x 1 x 3 | Black |   | |
1 X Tile 2 x 2 with Groove | Red |   | |
2 X Brick 1 x 2 | Red |   | |
1 X Technic, Brick 1 x 2 with Hole | Red |   | |
1 X Plate, Modified 1 x 4 Offset | Black |   | |
1 X Plate 2 x 2 | Red |   | |
1 X Plate 2 x 6 | Red |   | |
1 X Windscreen 10 x 4 x 2 1/3 Canopy | Trans-Neon Green |   | |
4 X Wedge, Plate 3 x 6 Cut Corners | Red |   | |
6 X Plate 1 x 6 | Red |   | |
2 X Hose, Flexible 8.5L with Tabless Ends (Ends same color as Tube) | Black |   | |
5 X Plate 1 x 2 | Black |   | |
1 X Brick, Modified 2 x 4 x 2 with Studs on Sides | Red |   | |
5 X Hinge Brick 1 x 2 Top Plate Thin | Red |   | |
5 X Hinge Brick 1 x 2 Base | Black |   | |
2 X Slope 45 2 x 2 Double Convex | Red |   | |
1 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Red |   | |
2 X Slope 45 2 x 2 with MTron Logo Pattern | Red |   | |
2 X Minifig, Utensil Radio (Undetermined Handle Type) | Black |   | |
2 X Tile 1 x 2 with Red and Yellow Controls Pattern | White |   | |
4 X Brick, Modified 1 x 1 with Headlight | Black |   | |
2 X Tile 2 x 2 with MTRON Logo Pattern | Red |   | |
2 X Engine, Strakes, 2 x 2 Thin Top Plate | Black |   | |
2 X Plate, Modified 1 x 2 with Handle on Side - Free Ends | Light Gray |   | |
2 X Hinge Panel 2 x 4 x 3 1/3 with MTron Pattern | Light Gray |   | |
3 X Hinge Vehicle Roof Holder 1 x 4 | Red |   | |
2 X Container, Box 2 x 2 x 2 Door with Slot and MTron Pattern | Light Gray |   | |
2 X Container, Box 2 x 2 x 2 - Solid Studs | Red |   | |
2 X Plate 1 x 1 | Black |   | |
2 X Tile 1 x 2 with Groove | Red |   | |
2 X Wedge, Plate 3 x 3 Cut Corner | Red |   | |
4 X Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 6mm) | Black |   | |
1 X Cockpit Space Nose with MTron Logo Pattern | Red |   | |
4 X Plate, Modified 1 x 1 with Clip Vertical - Type 3 (thick U clip) | Black |   | |
2 X Plate, Modified 1 x 1 with Clip Light - Thick Ring | Red |   | |
1 X Wedge, Plate 3 x 4 without Stud Notches | Light Gray |   | |
1 X Hinge Plate 2 x 4 - Male (Digger Bucket Holder) | Black |   | |
1 X Hinge Plate 2 x 4 - Female (Digger Bucket Holder) | Black |   | |
1 X Wedge, Plate 3 x 4 without Stud Notches | Red |   | |
1 X Plate 4 x 4 | Red |   | |
9 X Plate 1 x 2 | Red |   | |
1 X Plate 2 x 2 | Light Gray |   | |
2 X Wedge, Plate 8 x 4 Wing Right | Black |   | |
2 X Wedge, Plate 8 x 4 Wing Left | Black |   | |
1 X Wedge 4 x 4 Triple Inverted | Red |   | |
1 X Tile 1 x 2 with Groove | Black |   | |
1 X Plate 2 x 3 | Red |   | |
1 X Slope, Inverted 45 4 x 2 Double | Red |   | |
1 X Slope, Inverted 45 4 x 4 Double | Red |   | |
4 X Slope, Inverted 45 2 x 1 | Red |   | |
2 X Slope, Inverted 33 3 x 2 without Connections between Studs | Red |   | |
4 X Slope 45 2 x 2 | Red |   | |
2 X Brick 1 x 16 | Black |   | |
1 X Wedge, Plate 8 x 8 with 4 x 4 Cutout | Red |   | |
1 X Plate 2 x 10 | Red |   | |
1 X Tail 4 x 2 x 2 | Black |   | |
1 X Hinge Brick 1 x 2 Base | Red |   | |
1 X Hinge Brick 1 x 2 Top Plate Thin | Black |   | |
8 X Cone 1 x 1 without Top Groove | Trans-Neon Green |   | |
3 X Cone 1 x 1 without Top Groove | Black |   | |
1 X Tile 1 x 1 with Computer Display Pattern | White |   | |
1 X Minifig, Utensil Tool Chainsaw Body | Black |   | |
1 X Plate 4 x 8 | Red |   | |
6 X Plate 2 x 2 | Black |   | |
5 X Brick, Modified 2 x 2 with Pin and No Axle Hole | Red |   | |
1 X Brick, Modified 1 x 2 with Pin | Red |   | |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Black |   | |
1 X Slope 45 2 x 2 with Black Grille Pattern | Red |   | |
2 X Lever Small Base with Light Gray Lever | Black |   | |
4 X Plate, Round 1 x 1 Straight Side | Trans-Neon Green |   | |
2 X Tile, Modified 1 x 2 with Handle | Black |   | |
3 X Brick 1 x 2 | Black |   | |
3 X Magnet Holder 2 x 3 | Red |   | |
1 X Wedge, Plate 3 x 4 without Stud Notches | Black |   | |
7 X Dish 2 x 2 Inverted (Radar) | Trans-Neon Green |   | |
2 X Bar 1 x 3 with Clip and Stud Receptacle (Robot Arm) | Black |   | |
4 X Wheel Hard Plastic Medium (35mm D. x 31mm) | Black |   | |
1 X Hinge Bar with 3 Fingers and End Stud (Control Lever) | Black |   | |
1 X Brick 2 x 3 | Red |   | |
2 X Plate 1 x 1 | Red |   | |
1 X Tile 1 x 1 with Red and Black Buttons Pattern | White |   | |
2 X Plate, Round 1 x 1 Straight Side | Red |   | |
1 X Brick, Round 1 x 1 with Fins | Trans-Neon Green |   | |
Отзывы о наборе LEGO 6862