Nome | Cor | |
8 X Plate, Modified 1 x 2 with 3 Teeth (Claws) | White | |  |
6 X Barb / Claw / Horn - Large | White | |  |
2 X Dinosaur Tail End Section / Horn | White | |  |
4 X Barb / Claw / Horn - Small | White | |  |
6 X Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove | Red | |  |
2 X Brick, Round 1 x 1 Open Stud | Red | |  |
1 X Plate, Modified 1 x 2 with Clip on Top | Red | |  |
1 X Tile 1 x 3 | Red | |  |
3 X Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) | Red | |  |
6 X Slope, Curved 2 x 1 | Yellow | |  |
3 X Brick, Modified 1 x 2 with Studs on 2 Sides | Yellow | |  |
2 X Barb / Claw / Horn - Small | Yellow | |  |
1 X Wedge 6 x 4 Triple Inverted Curved | Yellow | |  |
2 X Slope, Curved 4 x 1 Inverted | Yellow | |  |
7 X Plate 2 x 2 | Yellow | |  |
2 X Plate 2 x 6 | Yellow | |  |
2 X Plate 1 x 3 | Yellow | |  |
1 X Wedge, Plate 4 x 4 | Yellow | |  |
4 X Plate 2 x 2 Corner | Yellow | |  |
3 X Plate 2 x 4 | Yellow | |  |
3 X Plate 2 x 3 | Yellow | |  |
4 X Bracket 1 x 2 - 1 x 2 | Black | |  |
2 X Bracket 1 x 2 - 2 x 4 | Black | |  |
1 X Bar 4L (Lightsaber Blade / Wand) | Black | |  |
3 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | Black | |  |
4 X Plate, Modified 1 x 1 with Light Attachment - Thick Ring | Black | |  |
2 X Bracket 1 x 2 - 2 x 2 | Black | |  |
2 X Plate, Modified 1 x 2 with Bar Handle on Side with Closed Ends | Black | |  |
1 X Tile 2 x 4 | Black | |  |
6 X Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth without Bottom Groove | Black | |  |
1 X Slope 33 2 x 4 Double | Black | |  |
1 X Technic, Brick Modified 2 x 2 with Pin Holes and 2 Rotation Joint Sockets | Black | |  |
3 X Brick 1 x 2 | Black | |  |
1 X Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern | Trans-Red | |  |
3 X Plate, Round 1 x 1 | Trans-Red | |  |
4 X Plate 1 x 2 | Orange | |  |
8 X Plate, Modified 4 x 4 with Curved Cutout | Dark Blue | |  |
4 X Slope, Curved 2 x 2 | Dark Blue | |  |
2 X Plate 2 x 2 | Dark Blue | |  |
1 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Dark Blue | |  |
4 X Slope 30 1 x 1 x 2/3 | Dark Blue | |  |
2 X Plate, Round Corner 4 x 4 | Dark Blue | |  |
2 X Plate 1 x 4 | Dark Blue | |  |
4 X Slope 30 1 x 1 x 2/3 | Dark Red | |  |
4 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Dark Red | |  |
4 X Plate 1 x 3 | Dark Red | |  |
4 X Plate 2 x 4 | Dark Red | |  |
2 X Cone 1 x 1 with Top Groove | Dark Red | |  |
4 X Slope, Curved 4 x 1 | Dark Red | |  |
1 X Vehicle, Mudguard 2 x 4 with Headlights Overhang | Dark Red | |  |
7 X Plate 2 x 2 | Dark Red | |  |
1 X Wedge 6 x 4 Triple Curved | Dark Red | |  |
2 X Wedge 2 x 1 with Stud Notch Left | Dark Red | |  |
4 X Plate, Round Corner 3 x 3 | Dark Red | |  |
2 X Wedge 2 x 1 with Stud Notch Right | Dark Red | |  |
3 X Slope, Curved 2 x 2 | Dark Red | |  |
2 X Plate 2 x 6 | Dark Red | |  |
4 X Technic, Brick 1 x 2 with Axle Hole | Dark Red | |  |
5 X Bar Holder with Handle | Dark Red | |  |
4 X Slope, Curved 2 x 1 | Dark Red | |  |
1 X Plate, Modified 1 x 2 with Small Tow Ball Socket on Side | Light Bluish Gray | |  |
3 X Plate, Modified 1 x 2 with Small Tow Ball Socket on End | Light Bluish Gray | |  |
2 X Plate, Modified 1 x 1 Rounded with Bar Handle | Light Bluish Gray | |  |
2 X Plate, Modified 1 x 2 with Bar Handle on End - Closed Ends | Light Bluish Gray | |  |
4 X Plate, Modified 1 x 2 with Tow Ball on Side | Dark Bluish Gray | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Ball Half (Horizontal Top) | Dark Bluish Gray | |  |
4 X Technic, Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Dark Bluish Gray | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray | |  |
4 X Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) | Dark Bluish Gray | |  |
3 X Plate, Modified 1 x 2 with Clip on End (Horizontal Grip) | Dark Bluish Gray | |  |
3 X Plate, Round 1 x 1 | Pearl Gold | |  |
1 X Minifigure, Utensil Telescope | Pearl Gold | |  |
3 X Plate, Round 1 x 1 | Trans-Bright Green | |  |
1 X Minifigure, Weapon Sword, Greatsword Pointed with Thick Crossguard | Flat Silver | |  |
2 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Red | |  |
2 X Technic, Axle 2 Notched | Red | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Black | |  |
1 X Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip) | Black | |  |
1 X Barb / Claw / Horn - Small | White | |  |
1 X Slope 30 1 x 1 x 2/3 | Dark Blue | |  |
1 X Plate, Round 1 x 1 | Pearl Gold | |  |
1 X Slope 30 1 x 1 x 2/3 | Dark Red | |  |
1 X Plate, Round 1 x 1 | Trans-Bright Green | |  |
1 X Plate, Round 1 x 1 | Trans-Red | |  |
1 X Barb / Claw / Horn - Large | White | |  |
1 X Barb / Claw / Horn - Small | Yellow | |  |
4 X Plate, Modified 1 x 1 with Light Attachment - Thick Ring | Dark Red | |  |
1 X Chain 5 Links | Pearl Gold | |  |
Отзывы о наборе LEGO 31102