Nome | Cor | |
2 X Brick, Modified 1 x 2 Log | White | |  |
1 X Sticker Sheet for Set 71721 - (67959/6300565) | (Not Applicable) | |  |
6 X Brick, Modified 1 x 1 with Stud on 1 Side | White | |  |
6 X Technic, Brick Modified 2 x 2 with Ball and Axle Hole with 6 Holes in Ball | White | |  |
7 X Technic, Brick Modified 2 x 2 with Ball Receptacle Wide and Axle Hole | White | |  |
2 X Bracket 5 x 2 x 1 1/3 with 2 Holes | White | |  |
18 X Cone 1 x 1 with Top Groove | White | |  |
2 X Brick, Round Corner 2 x 2 Macaroni with Stud Notch and Reinforced Underside | White | |  |
1 X Brick, Modified 2 x 2 with Pins and Axle Hole | White | |  |
2 X Technic, Brick 1 x 4 with Holes | White | |  |
3 X Slope 45 1 x 1 Double | White | |  |
6 X Slope 30 1 x 1 x 2/3 | White | |  |
2 X Slope 30 1 x 2 x 2/3 | White | |  |
1 X Slope 45 2 x 1 Double / Inverted - with Bottom Stud Holder | White | |  |
1 X Slope, Inverted 45 4 x 2 Double | White | |  |
10 X Slope, Curved 2 x 1 | White | |  |
2 X Wedge 2 x 2 Pointed with Stud Notches | White | |  |
5 X Slope, Curved 2 x 2 | White | |  |
2 X Brick, Arch 1 x 3 x 2 Curved Top | White | |  |
4 X Slope, Curved 3 x 1 | White | |  |
4 X Slope, Curved 4 x 1 Inverted | White | |  |
2 X Slope, Curved 4 x 1 Double | White | |  |
1 X Slope, Curved 4 x 1 | White | |  |
4 X Technic, Liftarm 1 x 7 Bent (4 - 4) Thick | White | |  |
1 X Technic, Axle and Pin Connector Perpendicular Double | White | |  |
3 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | White | |  |
1 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | White | |  |
8 X Plate 2 x 2 Corner | White | |  |
2 X Tile, Modified 2 x 3 Pentagonal | White | |  |
2 X Plate 2 x 3 | White | |  |
2 X Plate 3 x 3 | White | |  |
4 X Plate 2 x 4 | White | |  |
2 X Plate 1 x 6 | White | |  |
2 X Plate 4 x 4 Corner | White | |  |
4 X Slope, Inverted 45 2 x 2 | White | |  |
2 X Bracket 1 x 1 - 1 x 1 Inverted | White | |  |
2 X Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) | White | |  |
5 X Plate, Modified 1 x 2 Rounded with 2 Open Studs | White | |  |
12 X Plate, Modified 1 x 1 Rounded with Bar Handle | White | |  |
2 X Bracket 1 x 2 - 1 x 2 | White | |  |
2 X Bracket 1 x 2 - 2 x 2 Inverted | White | |  |
3 X Tile, Modified 2 x 2 Inverted | White | |  |
1 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | White | |  |
1 X Plate 2 x 10 | White | |  |
2 X Plate, Modified 1 x 2 with Handles on Ends - Closed Ends | White | |  |
1 X Tile, Modified 2 x 3 with 2 Open O Clips | White | |  |
18 X Plate, Round 1 x 1 with Open Stud | White | |  |
5 X Wedge, Plate 2 x 2 Right | White | |  |
5 X Wedge, Plate 2 x 2 Left | White | |  |
1 X Wedge, Plate 3 x 2 Left | White | |  |
2 X Wedge, Plate 4 x 2 Left | White | |  |
2 X Wedge, Plate 4 x 2 Right | White | |  |
1 X Wedge, Plate 3 x 2 Right | White | |  |
4 X Plate, Round 2 x 2 with Axle Hole | White | |  |
3 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | White | |  |
4 X Tile, Round 2 x 2 with Open Stud | White | |  |
12 X Wedge, Plate 2 x 2 Cut Corner | White | |  |
4 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | White | |  |
1 X Wedge, Plate 6 x 3 Left | White | |  |
1 X Wedge, Plate 6 x 3 Right | White | |  |
6 X Wedge, Plate 2 x 4 | White | |  |
4 X Wedge, Plate 3 x 3 Cut Corner | White | |  |
1 X Wedge, Plate 4 x 4 | White | |  |
6 X Plate, Modified 4 x 4 with Curved Cutout | White | |  |
4 X Technic, Liftarm 1 x 2 Thin | White | |  |
12 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | White | |  |
2 X Torso Mechanical, Battle Droid | White | |  |
2 X Arm Skeleton, Bent with Clips (Horizontal Grip) | White | |  |
1 X Bone, Short | White | |  |
12 X Barb / Claw / Horn - Small | White | |  |
1 X Barb / Claw / Horn - Small | White | |  |
8 X Barb / Claw / Horn - Large | White | |  |
1 X Slope 30 1 x 1 x 2/3 | White | |  |
1 X Plate, Round 1 x 1 with Open Stud | White | |  |
8 X Vehicle, Mudguard 2 x 4 with Flared Wings | White | |  |
3 X Wedge 2 x 1 with Stud Notch Left | White | |  |
10 X Plate, Modified 1 x 1 with Tooth Horizontal | White | |  |
3 X Wedge 2 x 1 with Stud Notch Right | White | |  |
9 X Bionicle 1 x 3 Tooth with Axle Hole | White | |  |
3 X Plate, Modified 1 x 2 with 3 Claws / Rock Fingers | White | |  |
2 X Wedge 4 x 4 Fractured Polygon Top | White | |  |
2 X Technic, Axle and Pin Connector Hub with 1 Axle | White | |  |
2 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | White | |  |
8 X Technic, Axle Connector with Axle Hole | White | |  |
1 X Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | White | |  |
24 X Technic, Axle and Pin Connector Angled #4 - 135 degrees | White | |  |
1 X Dice Spinner with White Inside and Hexagonal Dots, Hearts and Skulls Pattern | Black | |  |
3 X Hinge Plate 2 x 4 with Articulated Joint - Female | White | |  |
11 X Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) | Black | |  |
12 X Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) | Black | |  |
2 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black | |  |
2 X Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud | Black | |  |
1 X Technic, Brick 1 x 2 with Hole | Black | |  |
1 X Brick, Modified 1 x 2 with Pins | Black | |  |
3 X Plate, Round 2 x 2 with Axle Hole | Black | |  |
8 X Bracket 1 x 2 - 1 x 2 Inverted | Black | |  |
2 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Black | |  |
2 X Technic, Pin 3L with Friction Ridges Lengthwise and Center Pin Hole | Black | |  |
2 X Technic, Ball Joint with Through Axle Hole | Black | |  |
4 X Bracket 1 x 1 - 1 x 1 | Black | |  |
9 X Tile, Round 1 x 1 | Black | |  |
1 X Tile, Round 1 x 1 | Black | |  |
8 X Plate, Round 1 x 1 | Black | |  |
1 X Plate, Round 1 x 1 | Black | |  |
16 X Barb / Claw / Horn - Small | Black | |  |
1 X Barb / Claw / Horn - Small | Black | |  |
2 X Bone, Short | Black | |  |
1 X Pneumatic T Piece Second Version (T Bar with Ball in Center) | Black | |  |
2 X Plate, Modified 1 x 1 Rounded with Bar Handle | Black | |  |
4 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Black | |  |
1 X Plate 1 x 2 | Black | |  |
2 X Slope 45 2 x 1 with 2/3 Cutout | Black | |  |
3 X Spider with Elongated Abdomen | Black | |  |
8 X Barb / Claw / Horn - Large | Black | |  |
14 X Technic, Pin with Friction Ridges Lengthwise and Tow Ball | Black | |  |
35 X Technic, Axle 2 Notched | Black | |  |
2 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black | |  |
1 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black | |  |
4 X Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | Black | |  |
4 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black | |  |
4 X Technic, Pole Reverser Handle / Axle Connector | Black | |  |
6 X Technic, Axle and Pin Connector Angled #2 - 180 degrees | Black | |  |
1 X Hinge Brick 2 x 2 Top Plate | Black | |  |
2 X Plate, Modified 2 x 2 with Wheels Holder | Black | |  |
1 X Technic, Brick Modified 2 x 2 with Pin Holes and 2 Rotation Joint Sockets | Black | |  |
1 X Turntable 4 x 4 Square Base, Locking | Black | |  |
10 X Technic, Axle 8 | Black | |  |
1 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Trans-Clear | |  |
1 X Plate 2 x 2 | Orange | |  |
1 X Wedge, Plate 6 x 3 Right | Orange | |  |
1 X Wedge, Plate 6 x 3 Left | Orange | |  |
4 X Plate, Round 4 x 4 with Hole | Orange | |  |
1 X Tile 2 x 4 | Orange | |  |
5 X Plate 2 x 4 | Orange | |  |
3 X Plate, Round Half 3 x 6 with 1 x 2 Cutout | Orange | |  |
8 X Plate, Round Corner 4 x 4 | Orange | |  |
1 X Plate 2 x 6 | Orange | |  |
8 X Plate, Round 1 x 1 | Lime | |  |
1 X Plate, Round 1 x 1 | Lime | |  |
2 X Plate, Modified 1 x 2 with Bar Handle on End - Closed Ends | Lime | |  |
4 X Plate 1 x 2 | Lime | |  |
4 X Brick, Modified 1 x 2 with Studs on 1 Side | Lime | |  |
4 X Plate 1 x 4 | Lime | |  |
2 X Brick 1 x 3 | Lime | |  |
1 X Technic, Brick 1 x 4 with Holes | Lime | |  |
6 X Plate 2 x 4 | Lime | |  |
1 X Tile 1 x 2 with Groove | Dark Tan | |  |
2 X Flag 2 x 2 Square | Dark Tan | |  |
2 X Wedge, Plate 2 x 4 | Dark Tan | |  |
1 X Wedge, Plate 3 x 3 Cut Corner | Dark Tan | |  |
2 X Plate 2 x 4 | Dark Tan | |  |
1 X Human Tool, Brick and Axle Separator | Dark Turquoise | |  |
1 X Plate, Round 2 x 2 with Axle Hole | Bright Green | |  |
4 X Technic, Pin 3L without Friction Ridges Lengthwise | Tan | |  |
1 X Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 | Red | |  |
1 X Technic, Axle 4 | Red | |  |
2 X Minifigure, Weapon Lightsaber Hilt Straight | Dark Brown | |  |
1 X Minifigure, Weapon Machete | Flat Silver | |  |
1 X Minifigure, Weapon Axe Head, Clip-on | Flat Silver | |  |
2 X Minifigure, Shield Round with Rounded Front with Black and Silver Ninjago Dragon Head Pattern | Flat Silver | |  |
1 X Minifigure, Shield Round with Stud and Ring Around Edge | Flat Silver | |  |
2 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | |  |
4 X Technic, Pin 1/2 | Blue | |  |
1 X Technic, Pin 1/2 | Blue | |  |
4 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue | |  |
3 X Cone 1 x 1 with Top Groove | Trans-Orange | |  |
5 X Slope 30 1 x 1 x 2/3 | Trans-Orange | |  |
1 X Slope 30 1 x 1 x 2/3 | Trans-Orange | |  |
2 X Brick, Round 2 x 2 with Axle Hole | Trans-Orange | |  |
6 X Plate 1 x 2 | Trans-Orange | |  |
1 X Brick 2 x 2 Corner | Dark Orange | |  |
1 X Rock 1 x 1 Crystal 5 Point | Trans-Dark Blue | |  |
7 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray | |  |
1 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray | |  |
2 X Brick, Modified 1 x 1 with Stud on 1 Side | Dark Bluish Gray | |  |
1 X Brick, Modified 1 x 1 with Studs on 4 Sides | Dark Bluish Gray | |  |
2 X Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud | Dark Bluish Gray | |  |
3 X Brick, Modified 1 x 2 with Masonry Profile (Brick Profile) | Dark Bluish Gray | |  |
2 X Brick, Modified 1 x 2 with Bar Handle | Dark Bluish Gray | |  |
2 X Brick, Modified Facet 2 x 2 | Dark Bluish Gray | |  |
2 X Technic, Brick 1 x 2 with Axle Hole | Dark Bluish Gray | |  |
8 X Technic, Brick 1 x 2 with Holes | Dark Bluish Gray | |  |
2 X Technic, Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Dark Bluish Gray | |  |
1 X Brick, Modified 2 x 2 with Grooves and Axle Hole | Dark Bluish Gray | |  |
3 X Technic, Brick 1 x 2 with Hole and Dual Liftarm Extensions | Dark Bluish Gray | |  |
2 X Bracket 3 x 2 x 1 1/3 | Dark Bluish Gray | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Dark Bluish Gray | |  |
1 X Brick 2 x 4 | Dark Bluish Gray | |  |
2 X Plate 1 x 1 | Dark Bluish Gray | |  |
1 X Plate 1 x 1 | Dark Bluish Gray | |  |
2 X Technic, Pin Connector Round 1L (Spacer) | Dark Bluish Gray | |  |
1 X Technic, Pin Connector Round 1L (Spacer) | Dark Bluish Gray | |  |
1 X Tile, Modified 1 x 1 with Open O Clip | Dark Bluish Gray | |  |
2 X Slope 45 2 x 1 Triple with Bottom Stud Holder | Dark Bluish Gray | |  |
3 X Slope 30 1 x 2 x 2/3 | Dark Bluish Gray | |  |
8 X Slope 45 2 x 1 with 2/3 Cutout | Dark Bluish Gray | |  |
6 X Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip) | Dark Bluish Gray | |  |
2 X Plate, Modified 1 x 2 with Pin Hole on Top | Dark Bluish Gray | |  |
8 X Slope 45 2 x 1 | Dark Bluish Gray | |  |
10 X Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray | |  |
2 X Slope 33 3 x 1 | Dark Bluish Gray | |  |
2 X Slope, Curved 2 x 1 Inverted | Dark Bluish Gray | |  |
2 X Technic, Liftarm 1 x 2 with Ball Joint Angled | Dark Bluish Gray | |  |
2 X Brick, Arch 1 x 3 x 2 | Dark Bluish Gray | |  |
2 X Slope, Curved 4 x 1 Double | Dark Bluish Gray | |  |
2 X Hinge Plate 1 x 4 Swivel Base with Same Color Hinge Plate 1 x 4 Swivel Top (2429 / 2430) | Dark Bluish Gray | |  |
1 X Tile, Round 2 x 2 with Hole | Dark Bluish Gray | |  |
3 X Tile, Round 2 x 2 with Bottom Stud Holder | Dark Bluish Gray | |  |
4 X Wedge, Plate 2 x 2 Cut Corner | Dark Bluish Gray | |  |
6 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Dark Bluish Gray | |  |
5 X Tile 1 x 2 with Groove | Dark Bluish Gray | |  |
2 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Dark Bluish Gray | |  |
1 X Plate 2 x 2 | Dark Bluish Gray | |  |
2 X Tile, Modified Facet 2 x 2 Corner with Cut Corner | Dark Bluish Gray | |  |
4 X Plate 2 x 2 Corner | Dark Bluish Gray | |  |
2 X Technic, Liftarm 1 x 3 Thin | Dark Bluish Gray | |  |
3 X Technic, Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes | Dark Bluish Gray | |  |
6 X Slope, Curved 3 x 2 x 2/3 with Two Studs, Wing End | Dark Bluish Gray | |  |
4 X Plate 2 x 4 | Dark Bluish Gray | |  |
4 X Plate 1 x 6 | Dark Bluish Gray | |  |
1 X Plate 2 x 8 | Dark Bluish Gray | |  |
1 X Hinge Brick 1 x 2 Base | Dark Bluish Gray | |  |
1 X Wedge, Plate 3 x 2 Right | Dark Bluish Gray | |  |
1 X Wedge, Plate 4 x 2 Left | Dark Bluish Gray | |  |
1 X Wedge, Plate 4 x 2 Right | Dark Bluish Gray | |  |
4 X Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | Dark Bluish Gray | |  |
5 X Technic, Axle and Pin Connector Hub with 2 Axles | Dark Bluish Gray | |  |
2 X Wedge 4 x 3 No Studs Stepped | Dark Bluish Gray | |  |
2 X Projectile Launcher, 4 x 2 x 1 with Bottom Axle (Launches 1 x 1 Round Tiles) | Dark Bluish Gray | |  |
3 X Plate, Round 4 x 4 with Hole | Dark Bluish Gray | |  |
3 X Hinge Plate 2 x 4 with Articulated Joint - Male | Dark Bluish Gray | |  |
1 X Wedge, Plate 4 x 4 | Dark Bluish Gray | |  |
5 X Wedge, Plate 3 x 6 Cut Corners | Dark Bluish Gray | |  |
2 X Technic, Plate 2 x 8 with 7 Holes | Dark Bluish Gray | |  |
2 X Bar 6L with Stop Ring | Reddish Brown | |  |
3 X Tile, Round 1 x 1 with Bar and Pin Holder | Reddish Brown | |  |
2 X Bar 1L with Top Stud and 2 Side Studs (Connector) | Reddish Brown | |  |
2 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | Reddish Brown | |  |
1 X Slope, Curved 2 x 1 | Reddish Brown | |  |
2 X Brick, Modified 1 x 2 Log | Reddish Brown | |  |
4 X Plate, Modified 1 x 2 with Clip on End (Horizontal Grip) | Reddish Brown | |  |
2 X Container, Box 2 x 2 x 2 - Top Opening | Reddish Brown | |  |
4 X Technic, Axle 3 with Stop | Reddish Brown | |  |
1 X Bar 4L (Lightsaber Blade / Wand) | Reddish Brown | |  |
2 X Technic, Axle 5 with Stop | Reddish Brown | |  |
2 X Bar 5L with Handle (Friction Ram) | Reddish Brown | |  |
2 X Plate 2 x 6 | Reddish Brown | |  |
3 X Technic, Axle 8 with Stop | Dark Bluish Gray | |  |
2 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | |  |
1 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | |  |
7 X Tile, Round 1 x 1 Heart | Pearl Gold | |  |
1 X Tile, Round 1 x 1 Heart | Pearl Gold | |  |
1 X Minifigure, Weapon Spear Tip with Fins | Pearl Gold | |  |
1 X Chain 5 Links | Pearl Gold | |  |
3 X Minifigure, Plume Feather Triple Compact / Flame / Water | Trans-Bright Green | |  |
1 X Minifigure, Plume Feather Triple Compact / Flame / Water | Trans-Bright Green | |  |
2 X Brick 1 x 2 without Bottom Tube | Trans-Bright Green | |  |
1 X Brick, Round 2 x 2 with Axle Hole | Trans-Bright Green | |  |
6 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Trans-Bright Green | |  |
1 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Trans-Bright Green | |  |
1 X Rock Boulder, Bottom | Trans-Bright Green | |  |
1 X Rock Boulder, Top | Trans-Bright Green | |  |
4 X Brick, Modified 1 x 1 with Bar Handle | Light Bluish Gray | |  |
2 X Slope 30 1 x 2 x 2/3 | Light Bluish Gray | |  |
2 X Slope 45 2 x 1 with Cutout without Stud | Light Bluish Gray | |  |
4 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray | |  |
5 X Technic, Axle 3 | Light Bluish Gray | |  |
1 X Technic, Pin 3L with Friction Ridges Lengthwise and Stop Bush | Light Bluish Gray | |  |
1 X Plate, Modified 1 x 2 with Bar Handle on Side with Free Ends | Light Bluish Gray | |  |
1 X Panel 1 x 2 x 1 with Rounded Corners | Light Bluish Gray | |  |
1 X Hinge Brick 1 x 2 Base | Light Bluish Gray | |  |
1 X Hinge Brick 2 x 2 Top Plate | Light Bluish Gray | |  |
12 X Tile, Modified 2 x 2 with Studs on Edge | Light Bluish Gray | |  |
1 X Antenna 1 x 4 - Flat Top | Light Bluish Gray | |  |
3 X Technic, Plate 2 x 6 with 5 Holes | Light Bluish Gray | |  |
1 X Minifigure, Weapon Machete | Flat Silver | |  |
3 X Technic, Bush | Light Bluish Gray | |  |
1 X Technic, Bush | Light Bluish Gray | |  |
1 X Technic, Pin 1/2 | Light Bluish Gray | |  |
1 X Technic, Pin 1/2 | Light Bluish Gray | |  |
1 X Technic, Axle Tow Ball | Light Bluish Gray | |  |
2 X Technic, Bush 1/2 Smooth | Light Bluish Gray | |  |
1 X Technic, Bush 1/2 Smooth | Light Bluish Gray | |  |
6 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Light Bluish Gray | |  |
1 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Light Bluish Gray | |  |
2 X Bracket 1 x 1 - 1 x 1 | Light Bluish Gray | |  |
1 X Plate, Modified 1 x 2 with Small Tow Ball Socket on Side | Light Bluish Gray | |  |
4 X Plate, Modified 1 x 2 with Pin Hole on Bottom | Light Bluish Gray | |  |
2 X Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent | Sand Green | |  |
2 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Dark Gray | |  |
2 X Minifigure, Weapon Sai | Pearl Dark Gray | |  |
1 X Cloth Wing Dragon Left, Black and Tattered with White Bones Pattern | White | |  |
1 X Cloth Wing Dragon Right, Black and Tattered with White Bones Pattern | White | |  |
1 X Minifigure, Shield Round with Rounded Front with Black and Gold Ninjago Lion Head Pattern | Pearl Gold | |  |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Dark Gray | |  |
1 X Bone, Short | White | |  |
1 X Tile, Round 1 x 1 with Bar and Pin Holder | Reddish Brown | |  |
1 X Minifigure, Weapon Spear Tip with Fins | Pearl Gold | |  |
3 X Hero Factory Arm / Leg Extender with Ball Joint and Ball Socket | Dark Bluish Gray | |  |
1 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray | |  |
3 X Pneumatic Hose Connector with Axle Connector | Dark Brown | |  |
1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | |  |
1 X Slope 45 1 x 1 Double | White | |  |
1 X Bone, Short | Black | |  |
1 X Minifigure, Weapon Sai | Pearl Dark Gray | |  |
1 X Barb / Claw / Horn - Large | White | |  |
1 X Arm Skeleton, Bent with Clips (Horizontal Grip) | White | |  |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Dark Brown | |  |
1 X Barb / Claw / Horn - Large | Black | |  |
1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Black | |  |
1 X Pneumatic T Piece Second Version (T Bar with Ball in Center) | Black | |  |
1 X Brick 2 x 2 with Lime and Yellowish Green Dragon Eye Pattern on Two Sides | White | |  |
1 X Minifigure, Head Modified Skull with Black Eyes, Nose and Mouth Pattern | White | |  |
1 X Minifigure, Head Modified Skull with Black Eyes, Nose, Mouth, White Pupils, Teeth and Sand Green Around Mouth Pattern | Yellowish Green | |  |
1 X Minifigure, Weapon Sword with White Skull Pommel and White Blade (Ivory Blade of Deliverance) | Black | |  |
1 X Propeller 1 Blade 10L with Bar (Sword Blade) | Pearl Dark Gray | |  |
1 X Turntable 4 x 4 x 2/3 Top with Black Square Base, Free-Spinning (60474 / 61485) | Dark Bluish Gray | |  |
1 X Rock Boulder, Top with Same Color Rock Boulder, Bottom (30293 / 30294) | Trans-Bright Green | |  |
1 X Tile, Modified 2 x 2 with Studs on Edge with Green Arrow and Cracks Pattern (Sticker) - Sets 71717 / 71721 | Light Bluish Gray | |  |
2 X Tile, Modified 2 x 2 with Studs on Edge with White Skull and Cracks Pattern (Sticker) - Sets 71717 / 71721 | Light Bluish Gray | |  |
1 X Tile, Modified 2 x 2 with Studs on Edge with Black Cross and Cracks Pattern (Sticker) - Sets 71717 / 71721 | Light Bluish Gray | |  |
1 X Ninjago Skull Dungeons Game Board | (Not Applicable) | | |
Отзывы о наборе LEGO 71721